Intended use
Our most commonly-used DOTITE product is our room temperature drying type. It is not only used in industrial production, but it is also used in university labs as a mounting material for scanning electron microscopes. Because it is an air-drying material, it can also conveniently be used for touching up and repairing printed circuitry.
Characteristics
Model No. | Volume Resistivity (Ω・cm) | Drying condition | Storage Condition | Thinner | Applicable method | Features |
---|---|---|---|---|---|---|
D-362 | 7×10-4 | 25℃ 3H. 100℃ 30min. |
Room Temp. | S thinner, S-2 thinner, Toluene |
Paint by brush or spatula, spraying, dispensing | Quick drying, Usable for screw lock |
D-500 | 8×10-5 | 25℃ 3H. 100℃ 30min. |
Room Temp. | S thinner, S-2 thinner, Toluene |
Paint by brush or spatula, spraying* | Good conductivity |
D-550 | 1×10-4 | 25℃ 1H. 100℃ 5min. |
Room Temp. | S thinner, S-2 thinner, Toluene |
Paint by brush or spatula, spraying* | Useable for fixing sample of electron microscope |
*For spraying, we recommend diluting by thinner before using.
All of the product groups described above conform to the European RoHS regulation.
The numeric values described above are the representative values, and not the specified values.